Steel mesh fence 6/6/6 with posts model ROM in anthracite or green

Fence set - double wire mesh fence, decorative fence 6/6/6 with posts Model ROM
Material galvanised steel and powder-coated in RAL 7016 anthracite or moss green 6005

The ROM fence set consists of double wire mesh incl. matching posts and is available in various heights and up to 40 m in length. matching posts and is available in various heights and up to a length of 40 m.
The ROM double rod fence offers a discreet and stylish way to maintain privacy. This modern fence is made of high-quality double wire mesh and sturdy welded steel wires. Small circular decorations in the upper section are accentuated by horizontal edging.

This double wire mesh fence is available galvanised plus powder-coated (RAL6005, moss green or RAL7016, anthracite grey). Special RAL colours are also available on request. The production of mats without overhang at any height is possible on request.
Under normal weather conditions, the protective zinc coating remains intact for up to 30 years. The additional plastic coating in RAL colours extends this protection for many more years.

Details:

• Lengths from 10 m to 40 m
• Fence package including matching number of posts TYPE VAP
• Height: 806 mm, 1006 mm or 1206 mm
• Mesh length: 2510 mm
• Wire thickness: 6/5/6 mm
• The mesh width is 50/200 mm
• Surface: hot-dip galvanised and additionally powder-coated in RAL 7016 anthracite grey
• no protrusion

Delivery incl. Matching post TYPE VAP:
incl. Fastening material (Profi l cover strip, stainless steel screws and plastic cap)
Post profile: 60 x 40 mm
Post length:
1300 mm for fence height 806 mm,
1500 mm for fence height 1006 mm,
1700 mm for fence height 1206 mm
Post colour: as selected, same colour as fence panel
Ground anchoring: For setting in concrete

Exact length calculation and post spacing:
Axial post spacing: 1 fence panel = 2520mm -> 5 fence panels = 12600mm
Clear post spacing: 1 fence panel = 2480mm


Secure packaging and fast delivery:
Delivery by forwarding agent securely lashed on a one-way pallet.
Unpacking on site without assembly on site.

Questions and answers:

Can I also cut or shorten the fence elements to size?
Yes, you can cut the rod mats to size using an angle grinder. The cut edges should be coated with zinc spray and paint to protect against corrosion.
You can find the right zinc and paint spray in the shop under >> Fastening and accessories <<

How can corners be designed?
For corners larger or smaller than 90°, simply place 2 posts, bend the bar mat or attach a U-profile fence connection strip. Find out more in the >> Installation instructions-fence-package-2m.pdf <<.
You can use a corner post for 90° corners. Available under >> Fastening and accessories <<

Are the posts only available for setting in concrete?
Yes, in this standard delivery programme there are posts only for setting in concrete.
However, the posts can also be shortened on site so that the base plate adapter can be pushed into the post tube from below and the fence post can be dowelled in place.
The adapters are offered separately under >> Fastening and accessories <<.

How are the fence elements connected to the gate post?
Gates are always supplied with 2 posts. The fence connection can be made using continuous perforated fence angle strips
or using simple fence connection brackets. You can find both under >> Fastening and accessories <<

Are there assembly instructions for inexperienced fence installers?
Yes, the assembly instructions are automatically included with every shipment.
You can also find the assembly instructions here: >> Assembly instructions-fence-package-2m.pdf <<
If you have any questions, you can also contact us by phone or email.