Steel mesh fence 6/5/6 with posts model MALAGA galvanised + coated RAL 7016

Fence package - double wire mesh fence, decorative fence 6/5/6 with posts Model MALAGA galvanised and powder-coated in anthracite RAL 7016

The MALAGA fence set consists of double wire mesh incl. matching posts and is available in various heights and up to 30 m in length. The MALAGA decorative fence impresses with its timeless elegance and blends seamlessly into different styles and planting schemes. It offers both protection and privacy. Small diamond-shaped decorative elements are accentuated by horizontal edging in the upper section of the double wire mesh panel.

This double wire mesh fence is available in a galvanised plus powder-coated finish (RAL 7016). Special RAL colours are also available on request. The production of mats without overhang in any height is possible on request.
Under normal weather conditions, the protective zinc coating remains intact for up to 30 years. The additional plastic coating in RAL colours extends this protection for many more years.

Details:

• Lengths from 2 m to 30 m
• Fence package including matching number of posts TYPE VAP
• Height: 806 mm, 1006 or 1206 mm
• Mesh length: 1910 mm
• Wire thickness: 6/5/6 mm
• without spikes / protrusion
• The mesh width is 50/200 mm
• Surface: hot-dip galvanised and also powder-coated to a high quality in RAL 7016 anthracite grey

Delivery incl. Matching post TYPE VAP:
incl. Fastening material (Profi l cover strip, stainless steel screws and plastic cap)
Post profile: 60 x 40 mm
Post length:
1300 mm for fence height 806 mm,
1500 mm for fence height 1006 mm,
1700 mm for fence height 1206 mm
Post colour: as selected, same colour as fence panel
Ground anchoring: For setting in concrete

Exact length calculation and post spacing:
Axial post spacing: 1 fence panel = 1920mm -> 5 fence panels = 9600mm
Clear post spacing: 1 fence panel = 1880mm


Secure packaging and fast delivery:
Delivery by forwarding agent securely lashed on a one-way pallet.
Unpacking on site without assembly on site.

Price incl. shipping and delivery free kerbside!

Questions and answers:

Can I also cut or shorten the fence elements to size?
Yes, you can cut the rod mats to size using an angle grinder. The cut edges should be coated with zinc spray and paint to protect against corrosion.
You can find the right zinc and paint spray in the shop under >> Fastening and accessories <<

How can corners be designed?
For corners larger or smaller than 90°, simply place 2 posts, bend the bar mat or attach a U-profile fence connection strip. Find out more in the >> Installation instructions-fence-package-2m.pdf <<.
You can use a corner post for 90° corners. Available under >> Fastening and accessories <<

Are the posts only available for setting in concrete?
Yes, in this standard delivery programme there are posts only for setting in concrete.
However, the posts can also be shortened on site so that the base plate adapter can be pushed into the post tube from below and the fence post can be dowelled in place.
The adapters are offered separately under >> Fastening and accessories <<.

How are the fence elements connected to the gate post?
Gates are always supplied with 2 posts. The fence connection can be made using continuous perforated fence angle strips
or using simple fence connection brackets. You can find both under >> Fastening and accessories <<

Are there assembly instructions for inexperienced fence installers?
Yes, the assembly instructions are automatically included with every shipment.
You can also find the assembly instructions here: >> Assembly instructions-fence-package-2m.pdf <<
If you have any questions, you can also contact us by phone or email.