Privacy fence garden fence with aluminum posts and larch wood anthracite RAL 7016 - 190 x 90cm

Privacy fence garden fence with aluminum posts and larch wood anthracite RAL 7016 - 190 x 90cm (height x length)

Privacy fence element with the combination of aluminum posts 68x68mm and horizontal larch wood battens. 
The fence infill is made of rhombus larch planks with the dimension 120x20mm.
The fence boards are simply inserted into the mounted fence posts and do not need to be screwed down individually.
This saves a lot of time during fence installation. Due to the grooves in the posts, the wood is safely guided and fixed.
The distance between the boards is made possible with spacers or spacer plates 1.5mm.
The stoppers can be used to adjust the distance to the floor. To do this, simply cut the stoppers to the desired length and screw them into the groove.
The top board is connected to the two aluminum posts with an angle in the groove. Thus, the two posts are securely connected and fixed.
We use only high-quality larch wood from sustainable forestry.
The aluminum fence posts are powder coated in RAL 7016 and are suitable for setting in concrete or for doweling with the matching post supports.
With our special movable post supports made of stainless steel, they can easily mount the posts on a slope.

Scope of delivery:
2x aluminum posts 68x68mm - 1900mm length
14x rhombus plank of larch 120 x 20mm - 900mm length
60x spacer plate
2x stopper with screws
2x angle - connector

Delivery as assembly kit.
Shipping costs vary depending on EU country.
Delivery to non EU countries please ask by email.
Shipping to Germany and Austria free of charge! 

Info about assembly and mounting:
Assembly instructions fence system - Click on the link!