Privacy fence garden fence with aluminum posts and wood anthracite RAL 7016 - 135 x 200cm

Privacy fence garden fence with aluminum posts and wood anthracite RAL 7016 - 135 x 200cm (height x length)

Privacy fence with the combination of aluminum posts 68x68mm and wood filling. 
The fence boards are simply pushed into the assembled fence posts and do not need to be screwed down individually.
This saves a lot of time when installing the fence. The wood is guided securely through the grooves in the posts
With the optional spacers or spacer plates, the distance (15 mm) between the boards is made possible.
The distance to the ground can be adjusted using the stoppers.
The top board is connected to the two aluminum posts with an angle connector in the groove. The two posts are thus rigidly connected and fixed.
The aluminum fence posts are powder-coated in RAL 7016 and are suitable for setting in concrete or dowelling with the matching post supports.

Scope of delivery:
- Aluminum post 68x68mm - 1350 mm length 
- 2x post cover each to cover the slot 
- Post caps made of plastic
- Stopper with screws 
- Angle - connector 
- Smooth edge boards planed on 4 sides made of Douglas fir wood 90 x 18mm - 2000mm length (cut to desired length on site)

• With 15mm spacer: 12 boards - without post supports
• Without spacer: 14 boards - without post supports
• With 15mm spacer - for setting in concrete: 10 boards
• Without spacer - for setting in concrete: 12 boards

Delivery as assembly kit.
Shipping costs vary depending on EU country.
Delivery to non EU countries please ask by email.
Shipping to Germany and Austria free of charge! 

Info about assembly and mounting:
Assembly instructions fence system - Click on the link!

Variant for setting in concrete:
This reduces the fence height by approx. 200 mm (see drawing):